ISO Consulting for the Food Industry

ISO consulting for the food industry

Food safety management systems: ISO 22000:2018, HACCP, PRPs, allergens, traceability, suppliers, internal audit and certification preparation.

Sector context

Food safety demonstrated through processes, controls and evidence

Organizations in the food industry must identify hazards, apply prerequisite programmes, control allergens and maintain traceability from receipt to delivery. The management system must reflect the real activity and allow rapid responses to deviations.

QMS Consulting designs or optimizes ISO 22000:2018 systems based on process flows, products, raw materials, suppliers, hygiene conditions, control measures and applicable obligations. Documentation is sized according to risk and used in operations, training and audits.

Why the management system matters

An effective system connects hazard analysis, PRPs, HACCP, traceability, suppliers, complaints and corrective actions in a coherent framework, supported by responsibilities and verifiable records.

Applicable standards

ISO standards relevant to the food industry

The choice depends on the organization's role in the food chain, products, processes, obligations, customers and risks. ISO standards complement the applicable legal and contractual requirements; they do not replace them.

ISO 22000:2018 - Food safety management system
Standard

ISO 22000:2018

Structures communication, PRPs, hazard analysis, control measures, traceability, verification and improvement of the food safety system.

Learn more →
ISO 9001:2026 - Quality management system
Standard

ISO 9001:2026

Clarifies processes, responsibilities, customer requirements, indicators, suppliers, nonconformities and quality improvement.

Learn more →
ISO 14001:2026 - Environmental management system
Standard

ISO 14001:2026

Supports the control of environmental aspects, compliance obligations, consumption, waste and emergency situations.

Learn more →
ISO 45001:2018 - Occupational health and safety management system
Standard

ISO 45001:2018

Helps manage risks for employees and contractors in production, storage, cleaning, maintenance and logistics.

Learn more →
ISO 39001:2012 - Road traffic safety management system
Standard

ISO 39001:2012

Can support the control of road risks associated with fleets, product transport and logistics activities.

Learn more →
Specialized services

ISO services for implementation, audit and competence development

ISO internal audit to verify the conformity and effectiveness of the system
Service

ISO Internal Audit

Assessing the conformity and effectiveness of processes, with risk-based sampling and evidence-backed findings.

Learn more →
Second-party audit for suppliers and subcontractors
Service

Second-Party Audit

Evaluating suppliers, warehouses, carriers and outsourced processes by criticality and performance.

Learn more →
ISO consulting for implementing management systems
Service

ISO Consulting

GAP analysis, defining the scope, process design, proportionate documentation and implementation support.

Learn more →
ISO certification preparation and the certification body's audit
Service

ISO Certification Preparation

Reviewing the system, checking evidence, addressing findings and preparing the team for the independent audit.

Learn more →
E-QMS, platform for the ISO management system
Platform

E-QMS platform

Documents, internal audit, nonconformities, corrective actions and management review, with alerts and reports generated automatically.

Learn more →
ISO Internal Auditor training for audit planning, auditing and reporting
Service

Internal Auditor Training

Practical training in planning, conducting, reporting and following up internal audits.

Learn more →
ISO Lead Auditor training for coordinating audits and audit teams
Service

Lead Auditor Training

Advanced preparation for coordinating programmes, teams and complex or integrated audits.

Learn more →
Risks and compliance

Common management risks in the food industry

Controls must be assessed in relation to the products, flows, staff, suppliers, hygiene conditions and available data.

  • hazard analysis that is incomplete or not updated after changes
  • PRPs and hygiene conditions applied inconsistently across areas, shifts or sites
  • insufficient control of allergens and cross-contamination
  • incomplete traceability or infrequent testing of recall procedures
  • suppliers approved as a formality, without criteria proportionate to risk
  • monitoring, verification and corrective actions insufficiently documented

A process-, hazard- and evidence-based approach

We link requirements to the process steps, hazards, control measures, responsibilities, suppliers and relevant records. Recommendations are prioritized by their impact on food safety.

Target results

Operational benefits of a well-implemented ISO 22000:2018 system

The value of the system appears when hazards are consistently controlled and deviations can be detected, contained and addressed quickly.

Systematic hazard control

Hazards and control measures are assessed, monitored, verified and updated according to the process.

More effective traceability and recall

Lots, raw materials, packaging, processes and destinations can be traced within an appropriate timeframe.

More rigorous allergen control

Identification, segregation, labelling, cleaning and verification are integrated into operational flows.

Suppliers evaluated according to risk

Selection and re-evaluation are linked to the criticality of raw materials, packaging and services.

Nonconformities and complaints handled in a structured way

Causes, trends and measures are followed up until effectiveness is confirmed.

Better audit preparation

Evidence on PRPs, HACCP, traceability and verification is organized for internal and external assessments.

Processes assessed

Processes that can be audited and optimized

The scope of the assessment is set according to products, processes, sites, suppliers, requirements and level of risk.

Hazard analysis and the control plan

Reviewing process steps, hazards, control measures, limits, monitoring and verification.

PRPs and hygiene conditions

Assessing infrastructure, cleaning, pest control, personnel, utilities, waste and contamination prevention.

Traceability and recall

Checking the information tracked, response times, responsibilities and recall tests.

Allergen management

Control of raw materials, segregation, recipes, labelling, cleaning and product changeovers.

Supplier control

Selecting, approving, monitoring and re-evaluating suppliers based on criticality and performance.

Nonconformities and corrective actions

Control of nonconforming product, root cause analysis, defining measures and verifying effectiveness.

Frequently asked questions

Answers about ISO consulting for the food industry

Which ISO standard is relevant for the food industry?

ISO 22000:2018 is the central standard for food safety management systems in organizations in the food chain.

What is the relationship between ISO 22000:2018 and HACCP?

HACCP supports hazard analysis and control, and ISO 22000:2018 integrates it into a broader management system, together with PRPs, communication and improvement.

Does QMS Consulting issue ISO certificates?

No. QMS Consulting provides consulting, internal audit, training and preparation. Certification is carried out by an independent body.

Is an internal audit required before certification?

The system must include planned internal audits to assess the conformity and effectiveness of processes.

Can ISO 22000:2018 be integrated with other standards?

Yes. Common processes can be coordinated with ISO 9001:2026, ISO 14001:2026 or ISO 45001:2018, while keeping the specific controls.

How long does implementation take?

The duration depends on the scope, products, sites, processes, suppliers, system maturity and available resources.

What documents are needed?

Documentation may include policies, PRPs, the hazard analysis, control plans, traceability, verification, audits and actions.

Can several ISO standards be integrated?

Yes. Common requirements can be managed together, while the controls specific to each standard remain distinct where necessary.

System configuration

How the right ISO configuration is determined

The configuration starts from products, processes, hazards, suppliers, obligations and objectives, not from a generic model.

Common requirements are integrated to avoid duplicate procedures and records, while specific controls are kept where the product, the process, the standard or the risk justifies them.

Situations in which we can support your organization

  • implementing a new or integrated ISO 22000:2018 system
  • GAP analysis and simplifying an existing system
  • internal audit and certification preparation
  • evaluating suppliers through second-party audits
Request an initial assessment
QMS Consulting

Discuss your organization's ISO goal

Send us your products, processes, sites, target standards and the deadline you are aiming for. This information allows us to configure a realistic plan.

Direct contact

Phone: +40 722 773 446

Email: contact@qms.ro

Address: 12 Petru Rareș Street, Bucharest

Send the request